Note : We Will Not Share Your Information To Any Third Parties.
| MRC | Criteria | Characteristic |
|---|---|---|
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25 TO 0.25 ALL SECTIONS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 135.0 ALL SECTIONS |
| ADAQ | BODY LENGTH | 1.857 INCHES MAXIMUM |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR 1ST SECTION 0.25 FREE AIR 2ND SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 30.000 KILOHMS 1ST SECTION 9.700 KILOHMS 2ND SECTION |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 2.500 INCHES NOMINAL |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AEDX | SHAFT STYLE | ROUND |
| ABXF | SHAFT LENGTH | 0.592 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 3.302 INCHES NOMINAL |
| AEFZ | SHAFT RUNOUT | 0.002 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.00100 INCHES |
| TTQY | TERMINAL TYPE AND QUANTITY | 10 TURRET |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 102.681 1ST SECTION AND 205.722 1ST SECTION 720.027 2ND SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 1080.0 NOMINAL |
| FEAT | SPECIAL FEATURES | BUILT-IN 3.846KOHM TRIM RESISTOR BETWEEN TERMINALS EIGHT AND TEN |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| AAQL | BODY STYLE | CYLINDRICAL HOLE/SLOT MOUNTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 868.604 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 0.80 INCH-OUNCES |
| ABTD | MOUNTING SLOT WIDTH | 0.204 INCHES NOMINAL |
| AEFY | SHAFT END PLAY | 0.00500 INCHES |
| AEGA | LATERAL RUNOUT | 0.002 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.1 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAPN | SECTION QUANTITY | 2 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 1ST SECTION GRAPH 2ND SECTION LINEAR |
| TEST | TEST DATA DOCUMENT | 19207-12292881 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| AXGY | MOUNTING METHOD | SLOT |
| CRJS | FIXED TAP QUANTITY PER SECTION | 2 1ST SECTION 1 2ND SECTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -0.5 TO 0.5 OHMS ALL SECTIONS |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | -5.0 TO 5.0 -65 DEG CELSIUS ALL SECTIONS AND -4.0 TO 4.0 -15 DEG CELSIUS ALL SECTIONS AND -2.5 TO 2.5 50 DEG CELSIUS ALL SECTIONS AND -5.0 TO 5.0 75 DEG CELSIUS ALL SECTIONS AND -5.0 TO 5.0 105 DEG CELSIUS ALL SECTIONS AND -5.0 TO 5.0 125 DEG CELSIUS ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| 140-0-1562 | 140-0-0-503 | 140-0-2-501 | 140-0-0-503 |
| 140-0-1562 | 140-0-0-500 | 140-0-0-101 | 140-0-00-103 |
| 140-0-0-202 | 140-0-0-103 | 140-0-0-502 | 140-0-2-202 |
| 140-0-0-520 | 140-0-0-102 | 140-0-00-501 | 140-0-1562 |
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
Don’t forget That If You’d Ever Like a Quote for Parts Within 15 Minutes or Less, You Can Fill out the Instant RFQ form On this Website’S Homepage.
Request for Quote
