Note : We Will Not Share Your Information To Any Third Parties.
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 1.31200 INCHES MINIMUM AND 1.31250 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.06200 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 1.099 INCHES MINIMUM AND 1.161 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 1.312 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.07300 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 1.442 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.630 INCHES NOMINAL |
| ADAV | OVERALL DIAMETER | 1.442 INCHES NOMINAL |
| AECZ | MOUNTING LIP DIAMETER | 1.43700 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.09300 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 340.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 0.50 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.00500 INCHES |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEGA | LATERAL RUNOUT | 0.002 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.00200 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.000 PERCENT, RATED AMPERES C AND BETTER FINISH |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.000 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50/+0.50 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -200.0/+200.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 1ST SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 2ND SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 7320.0 ALL SECTIONS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 8 TAB, SOLDER LUG |
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
Don’t forget That If You’d Ever Like a Quote for Parts Within 15 Minutes or Less, You Can Fill out the Instant RFQ form On this Website’S Homepage.
Request for Quote
