Note : We Will Not Share Your Information To Any Third Parties.
| MRC | Criteria | Characteristic |
|---|---|---|
| FEAT | Special Features | 51 INDICATOR,THD DIAL,LATHE;4 JAW,FACEPLATE,6 IN.;1 KNURLING TOOL,SELFCENTERING,LATHE,5/8 BY 1-3/8 IN.;1 REST STEADY,LATHE ROLLER JAWS;1 SOCKET,TAPER SHANK TOOL,EXTENSION,NO. 4 MORSE TAPER SHANK;1 SOCKET,TAPER SHANK TOOL,REDUCING,NO. 2 MORSE TAPER SHANK;1 SOCKET,TAPER SHANK TOOL,REDUCING,NO. 3 MORSETAPER SHANK;1 STOP,CARRIAGE,LATHE MICROMETER;1 STOP,THD CUTTING,LATHE;1 TAPER ATTACHMENT,LATHE;1 TOOL POST,LATHE;1WRENCH,OPEN END;1 WRENCH,SPANNER;1 WRENCH,T HANDLE;1 WRENCH,TAILSTOCK;1 WRENCH,TOOL POST" |
| ACDC | Current Type | AC |
| APGF | Design Type | SCREW |
| AWHA | Bed Type | REMOVABLE BLOCK GAP |
| AWLX | Electric Motor Quantity | 1 |
| AAXX | Mounting Type | BENCH |
| ASHK | Electric Motor Horsepower Rating | 3.0 |
| ADQR | Center To Center Distance | 30.000 INCHES NOMINAL |
| ELEC | Voltage In Volts | 220.0 AND 440.0 |
| AGLD | Performance Type | STANDARD DUTY |
| FAAZ | Phase | THREE |
| BTSZ | Spindle Speed Quantity | 12 |
| BTTB | Spindle Speed Range In Rpm | +25.0/+1500.0 |
| AKSL | Purpose For Which Designed | GENERAL |
| BTTG | Swing Over Cross Slide | 10.750 INCHES NOMINAL |
| BTWB | Thread Change Quantity | 48 |
| AKYD | Accessory Components And Quantity | 1 ADAPTER,HEADSTOCK,1-1/2 IN. DIA;1 ADAPTER,TAILSTOCK,1-1/2 IN. DIA;1 BAG,CANVAS,TRANSPOSING GEARS;1 BUSHING,SPINDLE;3 CENTER,LATHE,HARDENED;1 CHUCK,COLLECT SPINDLE NOSE,9 IN.;1 CHUCK,DRILL,1/8 THRU 5/8 IN. CAPACITY;1 CHUCK,INDEPENDENT JAW,6 IN.;1 CHUCK,INDEPENDENT JAW,10 IN.;1 CHUCK,UNIVERSAL JAW,5 IN.;1 COLLAR,LATHE METRIC TRANSPORING GEAR;1 COLLAR SET,MACHINE,1/16 THRU 1-3/8 IN.;1 COVER,LATHE,CANVAS;1 DOG,LATHE,1/2 IN.CAPACITY;1 DOG,LATHE,1-1/4IN. CAPACITY;1 DRIFT SET,DRILL SIZES 1-2 AND 3;1 FACEPLATE,METALWORKING,LATHE 9 IN. DIA;1 FACEPLATE,METALWORKING,LATHE 24 IN. DIA;1 GEAR SET,LATHE METRIC TRANSPOSING TO CUT .25 TO 2.50 MM;1 HOLDER,CUTTING TOOL BORING;1 HOLDER,CUTTING TOOL BORING 5/8 BY 1-1/4 IN.;1HOLDER,CUTTING TOOL,RH OFFSET,5/8 BY 1-3/8 IN.;1 HOLDER,CUTTING TOOL,STRAIGHT,5/8 BY 1-1/4 IN.;1 HOLDER,CUTTING TOOL,STRAIGHT,5/8 BY 1-3/8 IN.;1 HOLDER,CUTTING TOOL,TUNNING,LH,5/8 BY 1-3/8 IN.;1 HOLDER,CUTTING TOOL,TURNING,RH 5/8 BY 1-3/8 IN." |
| BTWC | Rated Swing Through Open Gap | 26.000 INCHES NOMINAL |
| BTWF | Rated Swing Over Closed Gap | 17.000 INCHES NOMINAL |
| BTWG | Actual Swing Over Closed Gap | 17.750 INCHES NOMINAL |
| FREQ | Frequency In Hertz | 60.0 |
| BTWL | Headstock Drive Type | GEARED HEAD |
| BTWM | Headstock Center Taper Size Designator | 4 MORSE |
| BTYP | Hole Diameter Through Spindle | 1.766 INCHES NOMINAL |
| BTYQ | Carriage Quantity | 1 |
| BTYR | Carriage Longitudinal Feed Operation Method | HAND AND POWER |
| BTYS | Carriage Cross Feed Operation Method | HAND AND POWER |
| BTYW | Gear Change Type | QUICK |
| BTZR | Thread Quantity Range | +2.0/+112.0 PER INCH |
| 17R1-2AA | 17R1-2AA | 17R-1C7LF | 17R12-1-1AA |
| 17R-JE-LF-SN | 17R102 | 17R105 | 17R-5C7LF |
| 17R1-1AA | 17R11 | 17R101126 | 17R-41 |
| 17R1-2AA | 17R105 | 17R11 | 17R1-1AA |
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
Don’t forget That If You’d Ever Like a Quote for Parts Within 15 Minutes or Less, You Can Fill out the Instant RFQ form On this Website’S Homepage.
Request for Quote
